Ceramic Disc Cartridge

Drip-Free Brass Cartridge, 500,000 times of on/off cycles, no dripping or no leaking, can be used for several years

Fast response, not easy to aging

A spare cartridge is provided for replacement in the future.

American Plumbing Connections

Standard NPT1/2" plumbing connections will be compatible with your waterpipes easily and save man-hour cost of installation.

Brass Knurled Handles

Different from the ordinary metal handles of other conventional models, it has a more metallic touch, showing the beauty of high-end luxury

Honeycomb Design Filter

Flexible Rotational Function: With its unique rotational Honeycomb design, it can reduce noise and ensure the safety of water.

1.Clean the water supply system.

Open the body valve system and place the bucket in front of the spout 1

Use pliers to slowly open the hot and cold water valve, let the water flow out of the spout 1 for one minute, close the valve.

Spout Installation

A.Install spout and decorative cover 1.Option: If the mounting surface is uneven, apply the appropriate sealant to the back of the washer 3.Then wrap the water sealing tape, twist the nozzle handle to the spout, and tighten it with the hex wrench.

B.Install spout 1.Secure with setting screws 2.

Handle flange mounting

Note: When drilling holes for hot and cold end valves, the recommended hole size must be less than 35mm. Install the handle decoration cover 2 on the sleeve 1. Install the O ring 3 to the decorative ring 4, and then cover the crank decorative cover 2.

Handle Installation

Note: Make sure the valve core is in the closed position, and be sure to use the handle assembly correctly by looking for the red and blue markings on the handle.

Install the handle 1 on the valve stem 3 and install the fixing screw 2. Repeat with the other handle.